FZP Undercut Anchors for Stone Panels
FZP Undercut anchors for natural stone from 2 cm panel thickness hold a European Technical Approval (ETA-11/0145). The approval assists with static calculation to determine the suitability of rainscreen panels for project applications.
Undercut anchors can reduce the thickness on many types of facade stone panels by up to 33%.
The rear mounted installation of the FZP undercut anchor utilises all the panel material, resulting in performance up to three times better than the alternatives. Increased performance means the thickness of the cladding material can be reduced.
The range includes:
Zykon-Panel Anchor FZP-II
Zykon-Panel Anchor FZP-II SO
Zykon-Panel Anchor FZP-II Carbon
Zykon-Panel Anchor FZP-II SO Carbon
Zykon-Panel Anchor FZP-II-VS
- Downloads
-
- Installation
-
Special drilling machines, are necessary for the drilling of the undercut hole. The anchor will be installed by a special setting tool.
- Advantages of FZP Undercut Anchors
-
Stress-free fixing in natural stone
Anchoring not visible from front of facade
Statically optimised position of anchor
Higher loads than traditional systems
Remaining Wall Depth drilling technique and stand-off fixing compensate for tolerance in panel thickness
