EJOT Super Epoxy SE800 Resin
EJOT Super Epoxy SE800 is an epoxy injection mortar for solid base materials. It works in dry, wet and flooded holes.
Service temperature range from -40ºC to +80ºC with a max long term temperature +50ºC and with a max short term temperature +80ºC
Product has no shrinkage making it ideal for oversized holes. Thixotropic, can be applied in both vertical and horizontal directions.
Anchors used for post-installed rebar connection designed according EN 1992-1-1
Anchor for use in non carbonated concrete C12/15 – C50/60 according EN206-1
The epoxy mortar is ideally suited for rebar connections that are installed with a large drill hole diameter and a high anchorage depth. It can also be used for diamond-drilled and water-filled drill holes.
- Downloads
-
- Approvals
-
ETA-13/0918
ETA-15/0536
Fire Rated R240
A+ rating VOC Cobntent - Emissions Dans Lair Interieur
- Technical Characteristics
-
Advantages
Suitable to anchor threaded rods and rebar into stone
Two component injection chemical anchor based on pure epoxy resin
Pure epoxy resin for high loads and no shrinkage
high chemical and temperature resistance for use with percussive and diamond drilled holes
Dynamic and long term resistance.
Fire resistance.
Types of Materials
Concrete, Solid brick, Solid stone, Solid block, Aerated concrete
Main Uses
Steel constructions - Console machines - staircases - High-racks - Wooden constructions - Reinforced bars
- Building Materials
-
Building materials
Approved for:Non-Carbonated Concrete C12/15 - C50/60
Solid Brick
Approval for threaded rods M8, M10, M12, and M16
Approval for rebar Ø 12, 16 and 20mm
Also suitable for:
Rebar connections
