Systems
Standard Fischer standard soffit designs up to 400mm using ex stock L and T profiles to support most soffit materials. Assembly of aluminium parts using self-drilling stainless Ejot tek screws.
Soffit design is constructed using FEA software to calculate deflection and the bending moments in the components. Through this analysis it is possible to design non-standard soffits up to 800mm in depth.
Fixing into concrete soffits, is generally a fixing zone where the concrete is classified as ‘cracked’, unless otherwise specified by the project engineer. Fixing into cracked concrete is an ETA, option 1 application, ranges such as; FAZ II through bolts or FBS II concrete screws would generally be specified by Fischer engineering department.
It is also possible to use standard helping hand brackets is preferred.
Where the soffit boards are joined together, either the 110mm, or the 60mm faced T rail, provides the correct dimensions to all the major board manufacturers specification, relating to surface area in contact with the panel, and movement joint between the abutting panels. Depending on the material type, generally support rails are set at 500mm to 600mm - for centre panel support generally use the L rail 51x61mm section.
FischerBWM facade systems are designed and manufactured to Eurocode 9. UK accreditation approvals through the new Winmark Approval, by Wintech and the BBA are confirmation of Eurocode design and manufacture processes.
UK accreditation
Winmark Approval
British Board of Agrément (BBA) – Stage 2 progressing
European accreditation
MPA National Technical Test Certification: FischerBWM aluminium profile sections in substructure systems and connections
Certification Conformity Structural Components and systems for structures to EXV2 according to EN 1090-2, for load-bearing structures in all types of buildings
Passivhaus Certification
CE-Certification & QM-cert ISO 9001
Environmental management standard ISO 14001
Fibrecement
Composite mineral material
Aluminium composite material
Metal sheet products
Cement boards
High Pressure Laminates (HPL)
Rail and if needed bracket configuration is specified by FischerBWM engineering department. To submit your project specifics please go to Contact.
FischerBWM design issued by Fischer Engineering department are covered by Product and design insurance
System components available for AutoCAD downloads.
RJ & Fischer offer a standard, available ex stock UK, range that covers most design requirements.
All rails available to specific RAL colours in Qualicoat on an order to order basis.
Manufactured from extruded aluminium alloys conforming to EN 573-3 (material) and EN 755 production standards.