Systems

Brickslip System

Vertical application
Aluminium
Fast installation
Safety

Brick Slip system are designed using vertical rails in a T & L geometry and horizontal sections depending on the brick tiles requirements.

Brick Slip System has been designed and specified to support a facing brick finish via horizontal system sections, where certain aesthetics of the facade is needed. Suitable as a light weight and cost-effective option comparing to the traditional masonry, the system could be fixed to different substrates such as concrete, steel and timber. Depending on the project calculation vertical supports to match the main structure of the building.

 

Enquire Now
  • Downloads
  • Approvals
  • Typical Façade Types
  • Technical Characteristics
  • Brochures and Catalogues

  • Approvals

     

    FischerBWM facade systems are designed and manufactured to Eurocode 9. UK accreditation approvals through the new Winmark Approval, by Wintech and the BBA are confirmation of Eurocode design and manufacture processes.

     

    UK accreditation

    Winmark Approval

    British Board of Agrément (BBA) – Stage 2 progressing

     

    European accreditation

    MPA National Technical Test Certification: FischerBWM aluminium profile sections in substructure systems and connections

    Certification Conformity Structural Components and systems for structures to EXV2 according to EN 1090-2, for load-bearing structures in all types of buildings

    Passivhaus Certification

    CE-Certification & QM-cert ISO 9001

    Environmental management standard ISO 14001

  • Typical Façade Types

     

    Brick Slip

  • Technical Characteristics

     

    Typical bracket configuration uses the Fixed Point bracket at the highest position on the vertical rail to support the façade vertical dead loads. The Sliding Point bracket is used typically on all other positions on the vertical rail to absorb the project wind loading. Bracket configuration is specified by FischerBWM engineering department. To submit your project specifics please go to Contact.

    FischerBWM design issued by Fischer Engineering department are covered by Product and design insurance

    System components available for AutoCAD downloads.

    RJ & Fischer offer a standard, available ex stock UK, range that covers most design requirements.

    All rails available to specific RAL colours in Qualicoat on an order to order basis.

    Bracket and rail systems from Fischer are interchangeable based on the project requirement. 'Helping Hand' brackets from SystemEVT are the example in the image, the most cost-effective bracket selection from the range. To achieve improved thermal performance to concrete substrate use FischerBWM ZeLa brackets.

    FischerBWM offer Europe’s largest range of Helping hand brackets which have been designed to help achieve the U-value. Bracket systems range from the ZeLa range, designed to achieve passive house levels of performance, to standard L brackets that suit most project requirements in the UK.

    Project thermal calculations to confirm insulation thickness available on a project by project basis.

    Material Specification

     

    Manufactured from extruded aluminium alloys conforming to EN 573-3 (material) and EN 755 production standards.