EJOT JT9-FR fasteners are manufactured from 316 (A4) grade austenitic stainless steel suitable for use when drilling and tapping into ALUMINIUM sections.
The 316 (A4) stainless fixing is typically used where the specification requires a higher corrosive resistance due to the local environment or nature of the building, this includes coastal/marine environments as well as food and chemical production facilities.
The FR range of fasteners are manufactured with low profile dome head which is a rounded top with a flat underside, they sit above work surfaces and tend to be used when requiring a more decorative finish.
FR fixings can be powder coated to colour match main façade for less visibility of the fixing head.
The drill point and thread forms are designed to provide maximum mechanical performance with ease of installation into aluminium or timber substrates.
Where specified they are assembled with a S12 stainless steel / EPDM vulcanised sealing washer ensuring a safe seal every time.
These fasteners are zinc coated for aesthetic reasons and waxed to lubricate the surface during installation.
The fixing can fix into aluminium sheets and sections 1.5-4.0mm in thickness.
RJ offer a complete range of EJOT stainless steel fasteners for other external applications.
European Technical Approval ETA-10/0200
T25 Torx Head
A4 Austenitic Stainless Steel fastener
S12 Srainless/EPDM vulcanised sealing washer
Drive: TORX® T25
Aluminium sections from 1.2 to 3.0mm in thickness
For use in high corrosive environments for assembling aluminium rainscreen bracketry. The JT9-FR$ Range is designed for fixing aluminium sections of 1.5 - 4.0 mm in thickness. The clamping range varies depending on the fixing WITH or WITHOUT an EPDM washer. For fixing to steel use the JT6 range.