Call us on 0844 414 2940

Rail Profiles

Standard L-Profiles Image

Standard L-Profiles

Vertical application
Wide range materials
Aluminium
Horizontal application

All systems are mainly designed using vertical rails in a T & L geometry.

Where the board joins, the 110 mm faced T rail provides the correct dimensions to all the major board manufacturers specification, relating to surface area in contact with the panel and movement joint between the abutting panels. For additional intermediate board support generally use the L rail 51x61mm section. Depending on the system type and application additional horizontal profiles might be added to T and L geometry, on order to fulfil the project requirements.

Enquire Now
  • Downloads
  • Approvals
  • Typical Facade Systems
  • Technical Characteristics

  • Brochures and Catalogues

  • Approvals

     

    FischerBWM facade systems are designed and manufactured to Eurocode 9. UK accreditation approvals through the new Winmark Approval, by Wintech and the BBA are confirmation of Eurocode design and manufacture processes.

     

    UK accreditation

    Winmark Approval

    British Board of Agrément (BBA) – Stage 2 progressing

     

    European accreditation

    MPA National Technical Test Certification: FischerBWM aluminium profile sections in substructure systems and connections

    Certification Conformity Structural Components and systems for structures to EXV2 according to EN 1090-2, for load-bearing structures in all types of buildings

    Passivhaus Certification

    CE-Certification & QM-cert ISO 9001

    Environmental management standard ISO 14001

  • Typical Facade Systems

     

    Brickslip system

    Rivet or Face-Fix system

    Fibre Cement & HPL 'Secret-Fix' system ATK 103S

    Timber Siding and Weatherboard system

    'Secret-Fix' Structural Bonding system

    Stone 20-40mm 'Secret-Fix' system ATK103P

    Stone ornate panels 40-80mm systemKERF

    Vertical ‘Cedral’ Weatherboard system ATK100H

    Cassette Panel system ATK 106 SZ

  • Technical Characteristics

     

    Typical bracket configuration uses the Fixed Point bracket at the highest position on the vertical rail to support the façade vertical dead loads. The Sliding Point bracket is used typically on all other positions on the vertical rail to absorb the project wind loading. Bracket configuration is specified by FischerBWM engineering department. To submit your project specifics please go to Project Builder.

    FischerBWM design issued by Fischer Engineering department are covered by Product and design insurance

    System components available for AutoCAD downloads.

    RJ & Fischer offer a standard, available ex stock UK, range that covers most design requirements.

    All rails available to specific RAL colours in Qualicoat on an order to order basis.

     

    Material Specification

     

    Manufactured from extruded aluminium alloys conforming to EN 573-3 (material) and EN 755 production standards.