Special profiles range includes different Pi and U sections engineered to support large cavities and where there is a need to span between floors. The profiles are also used if building substrate is variable or where a subframe needs to carry heavy weight façade. The face of the profiles varies depending on the system and application and they are designed for U shaped brackets.
Stone 40-50mm ‘Secret-Fix’ systemONE
Typical bracket configuration uses the Fixed Point bracket at the highest position on the vertical rail to support the façade vertical dead loads. The Sliding Point bracket is used typically on all other positions on the vertical rail to absorb the project wind loading. Bracket configuration is specified by FischerBWM engineering department. To submit your project specifics please go to Project Builder.
FischerBWM design issued by Fischer Engineering department are covered by Product and design insurance
System components available for AutoCAD downloads.
RJ & Fischer offer a standard, available ex stock UK, range that covers most design requirements.
All rails available to specific RAL colours in Qualicoat on an order to order basis.
Manufactured from extruded aluminium alloys conforming to EN 573-3 (material) and EN 755 production standards.