Helping Hand Brackets

ATK Horizontal Brackets

Horizontal application
Aluminium
Longer sizes available
Additional elements available

ATK Horizontal brackets are designed in a vertical direction to enable simple fixing to the SFS stud.

With projection from 80 to 320mm ATK Horizontal brackets are the best solution for to support T and L profiles in the horizontal plain for vertical plank systems. The bracket set includes: Bracket base, T-piece and anodized rivet. Depending on the substrate, the brackets could be supplied with different holes and slots configuration (ex. for concrete).


FischerBWM offer Europe’s largest range of Helping Hand brackets which have been designed to help achieve the U-value. Bracket systems range from the ZeLa range, designed to achieve passive house levels of performance, to standard L brackets that suit most project requirements in the UK.

Project thermal calculations to confirm insulation thickness available on a project by project basis.

Enquire Now
  • Downloads
  • Approvals
  • Typical Facade Systems
  • Technical Characteristics
  • Brochures and Catalogues

  • Approvals

     

    FischerBWM facade systems are designed and manufactured to Eurocode 9. UK accreditation approvals through the new Winmark Approval, by Wintech and the BBA are confirmation of Eurocode design and manufacture processes.

     

    UK accreditation

    Winmark Approval

    British Board of Agrément (BBA) – Stage 2 progressing

     

    European accreditation

    MPA National Technical Test Certification: FischerBWM aluminium profile sections in substructure systems and connections

    Certification Conformity Structural Components and systems for structures to EXV2 according to EN 1090-2, for load-bearing structures in all types of buildings

    Passivhaus Certification

    CE-Certification & QM-cert ISO 9001

    Environmental management standard ISO 14001

  • Typical Facade Systems

     

    Vertical ‘Cedral’ Weatherboard system ATK100H

  • Technical Characteristics 

     

    Typical bracket configuration uses the same bracket throughout the façade. The T-piece is a Fixed Point bracket using a rivet connection into the pre-drilled holes into the bracket and T-piece. The T-piece is pre-slotted and holed to be used as a sliding or Fixed Point connection. Generally, per rail there should be one Fixed Point, with the other connections using the slot for expansion and contraction of the rail. Bracket configuration is specified by FischerBWM engineering department. To submit your project specifics please go to Project Builder.

    FischerBWM design issued by Fischer Engineering department are covered by Product and design insurance

    System components available for AutoCAD downloads.

    RJ & Fischer offer a standard, available ex stock UK, range that covers most design requirements.

    All rails available to specific RAL colours in Qualicoat on an order to order basis.

     

    Material Specification 

     

    Manufactured from extruded aluminium alloys conforming to EN 573-3 (material) and EN 755 production standards.