Fischer SXRL has up to three anchorage depths and is approved for multiple fixings of non-structural systems in concrete, masonry and aerated concrete.
The SXRL10 has an approval for single-point fixing into concrete and the SXRL14 can be used for stand off installation of facades under compression load.
In perforated brick masonry, the two expansion zones of the plug apply force evenly where as in aerated concrete and solid brick materials they unite to form one long expansion element to ensure excellent load values.
Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole.
With deep set installations the longer ribs prevent the plug from turning during installation.
SXRL lengths available up to 240mm to provide the right plug for all applications.
DoP No. 0048
DoP No. 0092
DoP No. 0152
Vertically perforated brick
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Thermal insulation blocks
Solid block made from lightweight and normal weight concrete
Solid sand-lime brick
Concrete ≧ C12/15
Also suitable for:
Natural stone with dense structure
Solid panel made from gypsum
A low tightening torque in relation to a very high overtorque during the setting process
Holds even in porous stones with large cavities and ensures during that it is firmly and securely anchored in the substrate
A distinct anti-rotation lock that works optimally even in critical building materials
The unique geometry of the SXR means that it can easily be hammered in without bending
Types of Materials
Concrete, Solid brick, Solid sand-lime brick, Hollow block made from lightweight concrete, Multilayer composite concrete wall
Facade and roof substructures made of wood and metal - Railings - Fire protection doors - Facings Cable conduits