EJOT BA-E Plus is a steel anchor for cost-effective fixations in cracked and non-cracked concrete > C20/25, generally for use when fixing RJ Facades Helping Hand brackets to concrete
Also suitable for natural stone, dry indoor areas and wet areas.
In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation.
For embedment of medium-heavy to heavy fixing such as pillars, metal structures and wooden structures, as well as for pre-,push-through and distance installations.
Characteristics values apply to the compression strength of C20/25 concrete. design load of an anchor for centric tension in cracked concrete.
Seismic approval category C2 (M10-M16)
Installation torque achieved with 30 – 50% fewer revolutions
M10 and M12 with 2 different anchorage depths
M10: 40 mm and 60 mm
M12: 50 mm and 70 mm
ETA-18/0219 Approval for concrete, option 1
Fire resistance classes F30, F60, F90, F120
ZAG -National Building and Civil Engineering Institute, Slovenia C1/C2
Edelstahl Rostfrei - Rust free Stainless
Also suitable for:
Natural stone with dense structure
BA-E Plus offers maximum load-bearing capacity in non-cracked concrete
Reduced anchorage depth reduces drill time - this saves time and reduces reinforcement hits during drilling
Long thread allows stand-off installations and variable usable lengths
Diameter 8 to 20 mm also for reduced anchorage depths, e.g. for small loads or if reinforcement is hit
Embossed letter on the head for subsequent control of the installation as it indicates the setting depth
Types of Materials
Concrete C20/25 to C50/60, Concrete C12/15, Natural stone with dense structure
Steel constructions - Railings - Ladders - Machines - Staircases - Gates – Facades