Aluminium & Steel Fixings

JT4-FR Stainless Steel 304 (A2) Tek Screws

EJOT JT4-FR fasteners are manufactured from 304 (A2) grade austenitic stainless steel suitable for use when drilling and tapping into ALUMINIUM sections.

The FR range of fasteners are manufactured with low profile dome head which is a rounded top with a flat underside, they sit above work surfaces and tend to be used when requiring a more decorative finish.

FR fixings can be powder coated to colour match main façade for less visibility of the fixing head.

The drill point and thread forms are designed to provide maximum mechanical performance with ease of installation into aluminium or timber substrates.

Where specified they are assembled with a S12 stainless steel / EPDM vulcanised sealing washer ensuring a safe seal every time.

These fasteners are zinc coated for aesthetic reasons and waxed to lubricate the surface during installation.

The fixing can fix into aluminium sheets and sections 1.5-6.0mm in thickness.

RJ offer a complete range of EJOT stainless steel fasteners for other external applications.

Enquire Now
  • Downloads
  • Approvals
  • Application
  • Technical Characteristics
  • Approvals

     

    European Technical Approval ETA-10/0200

  • Application

     

    Use for assembling aluminium rainscreen bracketry. The JT4 Range is designed for fixing aluminium sections of 1.5 - 4.0 mm in thickness. The clamping range varies depending on the fixing WITH or WITHOUT an EPDM washer. For fixing to steel use the JT3 range.

  • Technical Characteristics 

     

    Head Type
    T25 Torx Head

     

    Material
    A2 Austenitic Stainless Steel fastener

     

    Washer
    S12 Stainless/EPDM vulcanised sealing washer

     

    Technical specifications
    Drive: TORX® T25
    Aluminium sections from 1.5 to 4.0mm in thickness