Aluminium & Steel Fixings

JT3-FR Stainless Steel 304 (A2) Tek Screws

EJOT JT3-FR fasteners are manufactured from 304 (A2) grade austenitic stainless steel with a hardened carbon steel drill point welded to the stainless steel shank.

The FR range of fasteners are manufactured with low profile dome head which is a rounded top with a flat underside, they sit above work surfaces and tend to be used when requiring a more decorative finish.

FR fixings can be powder coated to colour match main façade for less visibility of the fixing head. 

The hardened drill point enables the screw to drill carbon steel sections and by having the lead threads formed on this hardened point this allows for correct tapping at high drilling speed.

Where fixing brackets to SFS we recommend they are used with the S12 stainless steel / EPDM vulcanised sealing washer ensuring a safe seal every time. 

These fasteners are zinc coated for aesthetic reasons and waxed to lubricate the surface during installation.

The fixing can fix into steel structures 1.2-12.0mm in thickness. 

RJ offer a complete range of Ejot stainless steel fasteners for other external applications.

 

Enquire Now
  • Downloads
  • Approvals
  • Application
  • Technical Characteristics
  • Approvals

     

    European Technical Approval ETA-10/0200

  • Application

     

    Use for assembling EVT Helping Hand brackets, Aluminium Tophats and Channels to steel frame systems. The clamping range varies depending on the fixing WITH or WITHOUT an EPDM washer.

  • Technical Characteristics 

     

    Head Type
    T25 Torx Head

     

    Material
    A2 Austenitic Stainless Steel fastener with Carbon steel drill point

     

    Washer
    S12 Stainless/EPDM vulcanised sealing washer

     

    Technical specifications
    Drive: TORX® T25
    JT3-FR3: Steel sections from 1.2 to 3.0mm in thickness
    JT3-FR6: Steel sections from 1.2-6.0mm in thickness
    JT3:FR12 Steel sections from 4.0-12.0mm in thickness